Makes by Mike

Enclosure for Konnected.IO Pro

$34.79

Organize your Konnected.IO system with a specially designed wall enclosure.

Supporting up to 2 Konnected.IO Pro panel boards, the enclosure incorporates integrated wire management, board standoffs, and ventilation openings which allows airflow around your Konnected.IO system. The package includes mounting hardware and a multi-way power pigtail that offers simple and neat installation.

Includes:

  • Enclosure base
  • Enclosure cover
  • Wall mounting screws
  • Board mounting screws
  • Multi-way power pigtail

Requires (not included):

  • Konnected.IO Pro panel boards
  • Konnected sticker

Instructionsclick here
Dimensions: click here

Note:

  • This is a custom 3D printed product
  • Complements your Konnected.IO installation
  • Not affiliated with Konnected.IO

Copyright Notice: All product designs, product documentation and listing content are owned by Makes by Mike LLC and may not be used in original or derivative form without the express written consent of Makes by Mike. All designs and listing content are @ 2020, Makes by Mike LLC.

How many Konnected.IO boards will you be installing?

Customizations Total: $0.00

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
E
Erik Smith
Great, but a few changes would make it better!

I ordered this to go along with a pair of Konnected.io Pro panels that I have controlling the sensors installed in my home. I'm very pleased with the enclosure overall, and it does everything it says in the description. It holds both of my Konnected.io Pro panels and mounted well to the wall.

There are three reasons I'm not giving it five stars:
1) The cutouts to run wires into the enclosure are just too small. The pair of Konnected.io Pro panels are designed to cover 12 zones each, so 24 or more wires (without getting into plugging devices into the accessory ports, Ethernet cables, power etc). I'm currently running 20 wires into the box and the cutouts are just barely big enough. I feel like the cutouts should be larger (or alternately, there should be a second cutout for the second board, see point 2).
2) The cables have to route around one of the boards, which means running 12 wires right next to lower board and the barrel plug for the power of the lower board. It's a real tight squeeze.
3) The place designed for the Konnected.io sticker on the front is scaled wrong, and the sticker when centered overlaps 1/4" on either side.

I remain pleased with the enclosure, and if an updated version comes out I'd be very interested in seeing some small changes to the design.

Erik, Thank you for the very good suggestions and points well taken. This is something we are going to look into. Always appreciate feedback.

R
Robert R.
Perfect size for my whole Konnected Pro system, including battery

I ordered this to get away from the metal box left over from the defunct alarm that I replaced. That old steel box was always way too big in the space, and with my conversion to Konnected it could have blocked WiFi backup connection. The double sized Pro box gives me room to expand (for a second Konnected Alarm Panel Pro board - space is waiting) if I add more zones in the future. For now the enclosure fits my single Pro board, the Konnected battery backup tucks neatly in the space reserved for the second board, and there is also room for a relay (and could hold a second relay if needed). I hung this on the wall sideways, it was easier in the space and the battery hangs properly on a nail this way, upright. I’m very pleased.

You may also like

Recently viewed

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
E
Erik Smith
Great, but a few changes would make it better!

I ordered this to go along with a pair of Konnected.io Pro panels that I have controlling the sensors installed in my home. I'm very pleased with the enclosure overall, and it does everything it says in the description. It holds both of my Konnected.io Pro panels and mounted well to the wall.

There are three reasons I'm not giving it five stars:
1) The cutouts to run wires into the enclosure are just too small. The pair of Konnected.io Pro panels are designed to cover 12 zones each, so 24 or more wires (without getting into plugging devices into the accessory ports, Ethernet cables, power etc). I'm currently running 20 wires into the box and the cutouts are just barely big enough. I feel like the cutouts should be larger (or alternately, there should be a second cutout for the second board, see point 2).
2) The cables have to route around one of the boards, which means running 12 wires right next to lower board and the barrel plug for the power of the lower board. It's a real tight squeeze.
3) The place designed for the Konnected.io sticker on the front is scaled wrong, and the sticker when centered overlaps 1/4" on either side.

I remain pleased with the enclosure, and if an updated version comes out I'd be very interested in seeing some small changes to the design.

Erik, Thank you for the very good suggestions and points well taken. This is something we are going to look into. Always appreciate feedback.

R
Robert R.
Perfect size for my whole Konnected Pro system, including battery

I ordered this to get away from the metal box left over from the defunct alarm that I replaced. That old steel box was always way too big in the space, and with my conversion to Konnected it could have blocked WiFi backup connection. The double sized Pro box gives me room to expand (for a second Konnected Alarm Panel Pro board - space is waiting) if I add more zones in the future. For now the enclosure fits my single Pro board, the Konnected battery backup tucks neatly in the space reserved for the second board, and there is also room for a relay (and could hold a second relay if needed). I hung this on the wall sideways, it was easier in the space and the battery hangs properly on a nail this way, upright. I’m very pleased.